angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- A novel routing protocol was proposed according to the angle of inclination of the nodes involved in wireless sensor network.
根据无线传感器网络中每个节点到汇聚节点的角度不同，提出一种新的角度路由协议。 - The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling. Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock.
建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型，并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。 - Lower and raise the ramp to see how the angle of inclination affects the parallel forces acting on the file cabinet.
把斜坡抬高或放低，看倾斜角度如何影响文件盒上的平行作用力。 - An instrument used by surveyors in order to measure an angle of inclination or elevation.
用来测量倾斜角的测量员使用的装置。 - Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术 - According to the degree in which the original ground surface has been denuded, the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress).
根据原始地面遭剥蚀的程度，可以大致地估算最大主应力和中间主应力的量值和方向； - A surveying instrument consisting of a spirit level and a sighting tube; used to measure the angle of inclination of a line from the observer to the target.
由一个水平仪和一个观测管组成的测量工具；用来测量从观测者到目标的直线的倾斜角。 - Any of numerous hand tools for boring holes. Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination
钻孔工具，手钻钻孔用的手持工具反井钻开挖大倾角斜井导孔的工程实践 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。 - Through the digital simulation of elevation, the author holds that the baseline angle of inclination measurement error is the important factor when designing Space-Bome InSAR system.
通过对高程精度数字仿真得出，基线倾角量测误差是设计星载InSAR系统需重点考虑的因素。